Geopanel STAR panels are interconnected using the standard red handles each Geoplast forwork has. The 4 handles holes are placed sideways to a top of the panel, and frontally to the other top, this arrangement permits the orthogonal connection between the panels.
In some arrangements, the position of the fastening holes allows the connection with the standard Geopanel panels too. Thanks to assimetrical holes placed in the middle of the panel, it is possible to connect the opposite panels with ligatures.
Casts higher than 120 cm, must use vertical reinforcements at each side of the forwork with steel alignment bars. EGABRUN1500, bar is locked in place over the standard forwork with the washers used for the ligatures. The unused holes will be closed with the provided caps (Ø25 cod. EGATADI0000 e Ø43 cod. EGATADI0043).
A - HANDLE
B - SPACER
D - ROLLING BAR
C - GEOPANEL STAR
E - ALIGNMENT BAR
F - ANCHOR NUT
GEOPANEL STAR consists of three different panels made of high resistance ABS plastic material.
GEOPANEL STAR 20 - 30 - 40 - 50 - 60
GEOPANEL STAR 25 - 35 - 45 - 55 - 65
GEOPANEL STAR 70 - 80 - 100
|SIZES: 68 H 60 cm ITEM WEIGHT: 6,40 kg N° N°HANDLES / ITEM: 8 MATERIAL: ABS||SIZES: 73 H 60 cm ITEM WEIGHT: 6,80 kg N° N°HANDLES / ITEM: 8 MATERIAL: ABS||SIZES: 108 H 60 cm ITEM WEIGHT: 9,60 kg N°HANDLES/ ITEM: 11 MATERIAL: ABS|
|CARACTERISTICS||GEOPANEL STAR||WOODEN FORMWORKS||STEEL FORWORKS|
|MODULARITY||Modular, compatible with the GEOPANEL system||Non - modular||Modular|
|PLUMBING||Short and quick||Long, sometimes the result may not be perfect||Fast but requires specific props|
|CONCRETE||Smooth surface||Irregular surface||Smooth surface|
|FINISHING STORAGE||No special storage conditions required||Must be stored in a dry environment||Must be stored in a dry environment|
|NUMBER OF USES||High||Low||High|
|ADEHERENCE TO CONCRETE||No||YES (eleasing elements needed)||YES (eleasing elements needednecessari)|